JINTAI Copper P-Trap Oil Return Bends for Refrigeration
Quote first, pay after confirmation. Product prices exclude shipping. No payment is required to submit a request.
How to order:
1) In your cart, select “Continue to order request” and provide product models/specifications, quantities and your full delivery address (country and postal code).
2) We confirm availability, the total including shipping, and estimated delivery time.
3) Once you approve the total, we email your Shopify payment link.
4) Pay via that link; dispatch is arranged after full payment.
Submitting a request does not complete your order. Delivery times are estimates.
JINTAI Copper P-Trap Oil Return Bends for Refrigeration
Product Description
JINTAI copper P-trap oil return bends are fittings for refrigeration pipework where the system design calls for an oil-return trap. The selected range includes 11 outside-diameter and wall-thickness combinations, from 12.7 × 0.8 mm to 53.98 × 1.5 mm.
Each variant is identified by its metric diameter and wall thickness. Select the complete specification and confirm the required connection details and installation geometry before ordering.
Oil-Return Piping Application
P-type oil traps form part of an engineered refrigerant-piping arrangement. In suitable suction-riser applications, a correctly designed trap helps support oil return with the refrigerant flow.
Trap location, orientation and spacing depend on the equipment and piping design. The fitting should be selected together with the pipe size, refrigerant flow conditions and equipment manufacturer’s installation requirements. General application reference: Copeland System Design Manual
Outside Diameter and Wall Thickness
The supplier listing uses the format:
Outside Diameter × Wall Thickness, in millimetres
For example, 25.4 × 1.0 mm identifies a listed outside diameter of 25.4 mm and a wall thickness of 1.0 mm.
The range includes four listed wall thicknesses: 0.8, 1.0, 1.1 and 1.5 mm. Check the wall thickness together with the diameter when selecting a specification.
The inch sizes below are rounded reference equivalents. Use the exact metric specification for ordering and confirm the connection fit to the mating tube.
Specification Table
| Listed Specification | Approx. Inch Reference | Listed OD | Listed Wall Thickness | Supplier-Listed Weight |
|---|---|---|---|---|
| 12.7 × 0.8 mm | 1/2 in | 12.7 mm | 0.8 mm | 47 g |
| 15.88 × 1.0 mm | 5/8 in | 15.88 mm | 1.0 mm | 95 g |
| 19.05 × 1.0 mm | 3/4 in | 19.05 mm | 1.0 mm | 138 g |
| 22.23 × 1.0 mm | 7/8 in | 22.23 mm | 1.0 mm | 178 g |
| 25.4 × 1.0 mm | 1 in | 25.4 mm | 1.0 mm | 218 g |
| 28.58 × 1.0 mm | 1-1/8 in | 28.58 mm | 1.0 mm | 297 g |
| 31.75 × 1.1 mm | 1-1/4 in | 31.75 mm | 1.1 mm | 453 g |
| 34.93 × 1.1 mm | 1-3/8 in | 34.93 mm | 1.1 mm | 512 g |
| 38.1 × 1.5 mm | 1-1/2 in | 38.1 mm | 1.5 mm | 745 g |
| 41.28 × 1.5 mm | 1-5/8 in | 41.28 mm | 1.5 mm | 850 g |
| 53.98 × 1.5 mm | 2-1/8 in | 53.98 mm | 1.5 mm | 1,350 g |
Weights are supplier-listed references. Weight tolerances, measurement methods and packaging inclusion are not stated in the source listing.
Connection and Installation Geometry
The supplier photographs show copper tube-end fittings. The reference listing does not define socket bore, insertion depth, joint tolerance, overall height, overall length, centre spacing or bend radius.
For replacement work or installation in a restricted space, provide measurements or a dimensioned drawing of the existing assembly. Confirm the end configuration, joint fit and installation envelope with the quotation.
The orientation of a product photograph does not establish the required installation orientation.
Material and Operating Requirements
The photographs show copper fittings. The exact copper alloy, purity, temper and manufacturing standard are not identified in the supplied listing.
Working pressure, operating temperature and refrigerant suitability should be confirmed for the selected product and application. These ratings cannot be established from diameter and wall thickness alone.
Weight and Packing Information
Supplier-listed weight references range from 47 g to 1,350 g across the selected specifications.
These figures are useful for comparing the listed products. Actual shipment weight and packing arrangements should be confirmed with the order.
Packing quantities, bag arrangements and carton quantities will be stated in the quotation according to the selected specifications and order quantity.
Technical Information
| Parameter | Information |
|---|---|
| Brand in Supplier Listing | 锦泰 |
| English Display Name | JINTAI |
| Product Type | Copper P-Trap Oil Return Bend |
| Number of Selected Specifications | 11 |
| Listed Outside-Diameter Range | 12.7–53.98 mm |
| Listed Wall Thicknesses | 0.8, 1.0, 1.1 and 1.5 mm |
| Listed Weight Range | 47–1,350 g |
| Variant Format | Outside diameter × wall thickness |
| General Application | Refrigeration oil-return pipework |
| Exact Copper Grade | To be confirmed |
| Connection and Socket Dimensions | To be confirmed |
| Overall Height, Length and Bend Radius | Not supplied in the reference listing |
| Working Pressure and Temperature | To be confirmed for the supplied product |
| Packing | According to the confirmed quotation |
Ordering Information
Please provide the required diameter × wall specification, quantity, refrigerant-piping application, mating tube details, available installation space and delivery destination.
Where required, include the working pressure, operating temperature and material or certification requirements so the supply specification can be checked.
| Size |
12.7 x 0.8 mm, 15.88 x 1.0 mm, 19.05 x 1.0 mm, 22.23 x 1.0 mm, 25.4 x 1.0 mm, 28.58 x 1.0 mm, 31.75 x 1.1 mm, 34.93 x 1.1 mm, 38.1 x 1.5 mm, 41.28 x 1.5 mm, 53.98 x 1.5 mm |
|---|



