ホーム Liquid Receiver Valves HPEOK PK-6110 Liquid Receiver Valves - SAE Flare and NPT

HPEOK PK-6110 Liquid Receiver Valves - SAE Flare and NPT

セール価格 $6.00

お見積もりを確認してからお支払いください。 商品価格に送料は含まれません。リクエストの送信時にお支払いは不要です。

ご注文の流れ:
1)カートで「注文リクエストの入力へ進む」を選び、商品型番・仕様、数量、お届け先の住所(国・郵便番号を含む)をご入力ください。
2)当店が在庫、送料込みの合計金額、配送予定をご案内します。
3)合計金額にご同意いただいた後、Shopifyのお支払いリンクをメールでお送りします。
4)リンクからお支払いいただき、全額入金後に発送を手配します。
リクエストの送信だけでは注文は完了しません。配送日数は目安です。

配送ポリシー
Model: PK-6110/22 - 1/4 in SAE x 1/4 in NPT
お気に入りに追加
比較リストに追加
HPEOK PK-6110 Liquid Receiver Valves - SAE Flare and NPT

HPEOK PK-6110 Liquid Receiver Valves - SAE Flare and NPT

Product Description

HPEOK PK-6110 liquid receiver valves provide threaded valve connections for commercial refrigeration and air-conditioning systems. This selection includes PK-6110/22 and PK-6110/32, both listed as vertical-type receiver valves in the manufacturer’s catalogue.

Each model combines a brass valve body, a side SAE flare line connection and a bottom NPT connection shown in the factory drawing. Select the complete model by checking both connection standards, the required flow coefficient and the available installation space.

SAE Flare and NPT Connections

PK-6110/22 has a 1/4-inch SAE flare inlet connection and a 1/4-inch NPT connection.

PK-6110/32 has a 3/8-inch SAE flare inlet connection and a 1/4-inch NPT connection.

Both models therefore have the same nominal NPT receiver-connection size. The SAE flare line connection is the connection that changes between these two models.

SAE flare and NPT identify different connection standards and sealing arrangements. A connection described only as “1/4 inch” is insufficient to establish fitment. Check the flare connection and receiver thread separately when selecting a replacement.

The SAE flare sizes correspond to nominal tube outside diameters of 6.35 mm for 1/4 inch and 9.525 mm for 3/8 inch. These values describe the corresponding tube sizes, not the threaded-end outside diameters. The 1/4 NPT designation is a nominal pipe-thread size and should not be treated as a 6.35 mm thread diameter.

Brass Valve Body

The manufacturer specifies a brass valve body for this receiver-valve series. The factory photograph and drawing show threaded connections and a capped stem arrangement.

The referenced catalogue page does not identify the exact brass alloy, seal compound, spindle material or cap material. Any material requirements for a specific application should be confirmed against the supplied product specification.

Working Pressure and Temperature

The maximum working pressure is 4.8 MPa, equivalent to 48 bar.

The published working-temperature range is −40°C to +130°C. Check these limits together with the actual refrigerant and system operating conditions when selecting the valve.

Refrigerant Applications

The manufacturer lists CFC, HCFC and HFC refrigerants, including R410A, for commercial refrigeration and civil and industrial air-conditioning installations.

For a refrigerant outside the manufacturer’s stated groups, provide the exact refrigerant designation and operating conditions for application confirmation. The referenced page does not provide a separate detailed oil-compatibility list.

Kv Flow Coefficient

The catalogue Kv factor is:

  • PK-6110/22: 0.44 m³/h
  • PK-6110/32: 1.35 m³/h

Kv is a valve flow coefficient used in sizing. These entries are not guaranteed refrigerant flow rates, compressor capacities or cooling outputs. Actual flow and pressure drop depend on the fluid and operating conditions.

Dimensions and Installation Clearance

Model SAE Flare Connection NPT Connection Kv Factor L1 L2 L
PK-6110/22 1/4 inch 1/4 inch 0.44 m³/h 72 mm 48 mm 27.5 mm
PK-6110/32 3/8 inch 1/4 inch 1.35 m³/h 77 mm 50 mm 31 mm

The factory drawing defines the dimensions as follows:

  • L1: Overall valve height.
  • L2: Distance from the top of the cap to the side-connection centreline.
  • L: Distance from the bottom NPT-connection axis to the end of the side connection.

Dimension L is not the complete valve width.

Use the original drawing to check receiver clearance and access to the connections and stem. The catalogue’s “vertical type” designation identifies the PK-6110 design; final mounting should follow the instructions for the supplied valve and receiver assembly.

Technical Specifications

Parameter Specification
Brand HPEOK
Series PK-6110
Product Type Liquid Receiver Valve
Catalogue Design Vertical type
Available Models PK-6110/22 and PK-6110/32
Valve Body Material Brass
Maximum Working Pressure 4.8 MPa / 48 bar
Working Temperature −40°C to +130°C
Applications Commercial refrigeration and civil/industrial air conditioning
Catalogue Refrigerants CFC, HCFC and HFC, including R410A
Line Connection SAE flare, labelled “Inlet” in the catalogue
Receiver Connection NPT, shown at the bottom of the factory drawing
NPT Size 1/4 inch on both models
SAE Flare Sizes 1/4 inch or 3/8 inch, depending on model
Kv Factors 0.44 or 1.35 m³/h, depending on model
Dimensional Units Millimetres
Weight and Installation Torque Not published on the referenced page

Selection and Ordering

Please provide the complete model, quantity, required SAE flare size, required NPT thread, receiver details, refrigerant, working pressure, working temperature and delivery destination.

For replacement enquiries, include the existing valve code, photographs and dimensions. Confirm any required flare nuts or other accessories as part of the quotation, since their inclusion is not established by the referenced catalogue page.

Model

PK-6110/22 - 1/4 in SAE x 1/4 in NPT, PK-6110/32 - 3/8 in SAE x 1/4 in NPT

最近見た商品