XIAXUE Single-Leaf Semi-Inset Hinged Cold Room Door
Quote first, pay after confirmation. Product prices exclude shipping. No payment is required to submit a request.
How to order:
1) In your cart, select “Continue to order request” and provide product models/specifications, quantities and your full delivery address (country and postal code).
2) We confirm availability, the total including shipping, and estimated delivery time.
3) Once you approve the total, we email your Shopify payment link.
4) Pay via that link; dispatch is arranged after full payment.
Submitting a request does not complete your order. Delivery times are estimates.
XIAXUE Single-Leaf Semi-Inset Hinged Cold Room Door
Product Description
The XIAXUE Single-Leaf Semi-Inset Hinged Cold Room Door provides insulated access for refrigerated storage rooms. Its manually operated door leaf is supported by external hinges and secured by closing hardware on the opposite side.
The semi-inset construction positions part of the insulated door panel within the surrounding frame when closed. The panel, frame and perimeter sealing arrangement form a coordinated assembly that helps limit heat transfer and air exchange through the closed entrance.
Available with color-coated steel or SUS304 stainless steel surfaces, the door offers three steel sheet thicknesses and six insulated panel thicknesses. These options allow the door construction to be specified according to the cold room design, installation environment and required finish.
The configuration shown features one door leaf, two external hinge assemblies, a manual latch handle, an orange outer frame and a dark perimeter sealing strip. Opening dimensions and hardware requirements are specified according to the project.
Single-Leaf Hinged Construction
A single insulated panel closes the doorway and opens on hinges fitted along one side of the frame. The operating handle and closing hardware are positioned on the opposite side for manual access.
The photographed configuration has two external hinge assemblies. Their positioning and adjustment should maintain alignment between the door panel, frame and latch.
The clear opening width and height should be selected according to the intended access requirements. Sufficient swing space must be available so that the opened door does not contact nearby walls, shelving or equipment.
Semi-Inset Frame Arrangement
The semi-inset design places part of the door leaf within the frame profile when closed. The frame, panel thickness and surrounding cold room wall must be coordinated to achieve the intended fit.
Accurate frame positioning helps the door close evenly against the specified sealing surfaces. The frame profile, inset depth and floor junction should follow the approved project drawing.
The orange outer frame visible in the photograph represents the configuration shown. Frame finish and construction details should follow the confirmed order specification.
Surface Material Options
Two surface materials are available:
- Color-Coated Steel: A coated metal surface for projects specifying a painted steel finish.
- SUS304 Stainless Steel: A stainless steel surface for projects requiring SUS304 door faces.
Both materials are available with steel sheet thicknesses of 0.3 mm, 0.4 mm and 0.5 mm.
Steel sheet thickness refers to the metal facing of the door panel. It is separate from the overall thickness of the insulated panel.
The reference photograph shows the door panel with protective film in place.
Insulated Panel Thickness
Available door panel thicknesses are:
50 mm, 75 mm, 100 mm, 120 mm, 150 mm and 200 mm.
Panel thickness should be selected according to the required storage conditions, surrounding cold room construction and project insulation requirements.
The complete door assembly—including the insulation, frame, sealing arrangement and installation—determines its suitability for the intended environment. Panel thickness alone does not establish a guaranteed operating temperature.
Manual Closing Hardware and Perimeter Sealing
The door is fitted with a manually operated latch handle on the side opposite the hinges. The latch and its corresponding frame hardware should be aligned to hold the door in its intended closed position.
A perimeter sealing strip is visible around the door assembly. Correct panel alignment and consistent sealing contact help limit air exchange when the door is fully closed.
Hinge adjustment, latch engagement and sealing contact should be checked together during installation. Any required frame heating or internal release arrangement should be included in the project specification.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | XIAXUE Refrigeration |
| Product Type | Single-Leaf Semi-Inset Hinged Cold Room Door |
| Door Configuration | Single Leaf |
| Number of Door Leaves | One |
| Operation | Manual hinged opening and closing |
| Door Construction | Semi-inset |
| Surface Material Options | Color-Coated Steel or SUS304 Stainless Steel |
| Steel Sheet Thickness Options | 0.3 mm, 0.4 mm and 0.5 mm |
| Door Panel Thickness Options | 50 mm, 75 mm, 100 mm, 120 mm, 150 mm and 200 mm |
| Door Panel Construction | Insulated panel with selected metal surface finish |
| Hinge Arrangement Shown | Two external hinge assemblies |
| Closing Hardware Shown | Manual latch handle and corresponding frame hardware |
| Sealing Arrangement Shown | Perimeter sealing strip |
| Frame Appearance Shown | Orange outer frame |
| Clear Opening Dimensions | Specified according to project requirements |
| Frame and Wall Interface | Coordinated with surrounding wall thickness and door construction |
| Floor Junction | Specified according to installation and access requirements |
Applications
Suitable configurations can be specified for:
- Walk-in cold storage rooms.
- Chilled and frozen food storage facilities.
- Restaurant and catering cold rooms.
- Supermarket refrigerated storage areas.
- Food preparation and processing facilities.
- Commercial refrigerated storage projects.
The door dimensions, insulation specification and hardware should be matched to the intended application.
Ordering and Installation Requirements
Confirm the clear opening width and height before ordering. These measurements describe the usable passage and should be distinguished from the overall frame dimensions and door leaf dimensions.
Provide the surrounding wall thickness and confirm the required hinge position and opening direction on the project drawing. Allow sufficient clearance for the door to swing open.
The frame must be securely supported and installed square. After fitting the door, check hinge alignment, latch engagement and sealing contact around the perimeter.
Specify the floor junction, any required heating and any internal release requirements during the quotation stage so that these details can be coordinated with the door assembly.
Request a Quotation
Please provide:
- Clear opening width and height.
- Required cold room operating temperature.
- Surrounding wall or panel thickness.
- Preferred surface material.
- Steel sheet thickness.
- Door panel thickness.
- Required opening direction and available swing space.
- Required hardware and installation details.
- Quantity and delivery requirements.
| Surface Material |
Color Steel, SUS304 Stainless Steel |
|---|---|
| Steel Thickness |
0.3mm, 0.4mm, 0.5mm |
| Panel Thickness |
50mm, 75mm, 100mm, 120mm, 150mm, 200mm |


