HPEOK PK-6110 Liquid Receiver Valves - SAE Flare and NPT
Primeiro o orçamento, depois a confirmação e o pagamento. Os preços dos produtos não incluem o frete. Não é necessário pagar para enviar uma solicitação.
Como comprar:
1) No carrinho, selecione “Continuar para a solicitação de pedido” e informe modelos/especificações, quantidades e endereço completo (país e código postal).
2) Confirmamos disponibilidade, o total com frete e o prazo estimado.
3) Após sua aprovação do total, enviamos por e-mail seu link de pagamento da Shopify.
4) Pague pelo link; o envio é organizado após o pagamento integral.
Enviar uma solicitação não conclui seu pedido. Os prazos são estimados.
HPEOK PK-6110 Liquid Receiver Valves - SAE Flare and NPT
Product Description
HPEOK PK-6110 liquid receiver valves provide threaded valve connections for commercial refrigeration and air-conditioning systems. This selection includes PK-6110/22 and PK-6110/32, both listed as vertical-type receiver valves in the manufacturer’s catalogue.
Each model combines a brass valve body, a side SAE flare line connection and a bottom NPT connection shown in the factory drawing. Select the complete model by checking both connection standards, the required flow coefficient and the available installation space.
SAE Flare and NPT Connections
PK-6110/22 has a 1/4-inch SAE flare inlet connection and a 1/4-inch NPT connection.
PK-6110/32 has a 3/8-inch SAE flare inlet connection and a 1/4-inch NPT connection.
Both models therefore have the same nominal NPT receiver-connection size. The SAE flare line connection is the connection that changes between these two models.
SAE flare and NPT identify different connection standards and sealing arrangements. A connection described only as “1/4 inch” is insufficient to establish fitment. Check the flare connection and receiver thread separately when selecting a replacement.
The SAE flare sizes correspond to nominal tube outside diameters of 6.35 mm for 1/4 inch and 9.525 mm for 3/8 inch. These values describe the corresponding tube sizes, not the threaded-end outside diameters. The 1/4 NPT designation is a nominal pipe-thread size and should not be treated as a 6.35 mm thread diameter.
Brass Valve Body
The manufacturer specifies a brass valve body for this receiver-valve series. The factory photograph and drawing show threaded connections and a capped stem arrangement.
The referenced catalogue page does not identify the exact brass alloy, seal compound, spindle material or cap material. Any material requirements for a specific application should be confirmed against the supplied product specification.
Working Pressure and Temperature
The maximum working pressure is 4.8 MPa, equivalent to 48 bar.
The published working-temperature range is −40°C to +130°C. Check these limits together with the actual refrigerant and system operating conditions when selecting the valve.
Refrigerant Applications
The manufacturer lists CFC, HCFC and HFC refrigerants, including R410A, for commercial refrigeration and civil and industrial air-conditioning installations.
For a refrigerant outside the manufacturer’s stated groups, provide the exact refrigerant designation and operating conditions for application confirmation. The referenced page does not provide a separate detailed oil-compatibility list.
Kv Flow Coefficient
The catalogue Kv factor is:
- PK-6110/22: 0.44 m³/h
- PK-6110/32: 1.35 m³/h
Kv is a valve flow coefficient used in sizing. These entries are not guaranteed refrigerant flow rates, compressor capacities or cooling outputs. Actual flow and pressure drop depend on the fluid and operating conditions.
Dimensions and Installation Clearance
| Model | SAE Flare Connection | NPT Connection | Kv Factor | L1 | L2 | L |
|---|---|---|---|---|---|---|
| PK-6110/22 | 1/4 inch | 1/4 inch | 0.44 m³/h | 72 mm | 48 mm | 27.5 mm |
| PK-6110/32 | 3/8 inch | 1/4 inch | 1.35 m³/h | 77 mm | 50 mm | 31 mm |
The factory drawing defines the dimensions as follows:
- L1: Overall valve height.
- L2: Distance from the top of the cap to the side-connection centreline.
- L: Distance from the bottom NPT-connection axis to the end of the side connection.
Dimension L is not the complete valve width.
Use the original drawing to check receiver clearance and access to the connections and stem. The catalogue’s “vertical type” designation identifies the PK-6110 design; final mounting should follow the instructions for the supplied valve and receiver assembly.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | HPEOK |
| Series | PK-6110 |
| Product Type | Liquid Receiver Valve |
| Catalogue Design | Vertical type |
| Available Models | PK-6110/22 and PK-6110/32 |
| Valve Body Material | Brass |
| Maximum Working Pressure | 4.8 MPa / 48 bar |
| Working Temperature | −40°C to +130°C |
| Applications | Commercial refrigeration and civil/industrial air conditioning |
| Catalogue Refrigerants | CFC, HCFC and HFC, including R410A |
| Line Connection | SAE flare, labelled “Inlet” in the catalogue |
| Receiver Connection | NPT, shown at the bottom of the factory drawing |
| NPT Size | 1/4 inch on both models |
| SAE Flare Sizes | 1/4 inch or 3/8 inch, depending on model |
| Kv Factors | 0.44 or 1.35 m³/h, depending on model |
| Dimensional Units | Millimetres |
| Weight and Installation Torque | Not published on the referenced page |
Selection and Ordering
Please provide the complete model, quantity, required SAE flare size, required NPT thread, receiver details, refrigerant, working pressure, working temperature and delivery destination.
For replacement enquiries, include the existing valve code, photographs and dimensions. Confirm any required flare nuts or other accessories as part of the quotation, since their inclusion is not established by the referenced catalogue page.
| Model |
PK-6110/22 - 1/4 in SAE x 1/4 in NPT, PK-6110/32 - 3/8 in SAE x 1/4 in NPT |
|---|






