HPEOK PKOLC Mechanical Oil Level Regulators – Fixed and Adjustable
先确认报价,再付款。 页面产品价格不含运费,提交需求时无需付款。
下单流程:
1)在购物车点击“继续填写订单申请”,提供产品型号/规格、数量和完整收货地址(含国家、邮编)。
2)我们确认库存、含运费的总金额和预计运输时间。
3)您确认总金额后,我们通过邮件发送 Shopify 付款链接。
4)您通过链接付款,全款到账后安排发货。
提交需求不代表完成下单,运输时间为预估。
HPEOK PKOLC Mechanical Oil Level Regulators – Fixed and Adjustable
Product Description
HPEOK PKOLC mechanical oil level regulators control the oil level in refrigeration compressor crankcases. Designed for low-pressure oil-management systems on parallel compressor racks, the regulators mount directly to a compatible compressor sight-glass housing.
The range includes the fixed-level PKOLC-2 and the adjustable PKOLC-2-5 and PKOLC-2-5E. Model selection depends on the required crankcase oil level, operating oil-pressure differential, compressor flange and equalization requirements.
Adapters are available for different compressor models. The required adapter and its inclusion in the supply must be confirmed when ordering.
PKOLC-2: Fixed Oil Level
PKOLC-2 maintains a fixed oil level at one-half of the sight glass. The manufacturer describes a float-operated valve that admits oil from the oil receiver when the level falls and closes when the required level is restored.
Its specified operating differential pressure is 0.35–2.0 bar. The catalogue lists no equalization connection and identifies the connection designation as “5 bolts”.
The one-half value describes the oil level in the sight glass. It does not indicate a half-inch pipe connection.
PKOLC-2-5: Adjustable Oil Level
PKOLC-2-5 provides an adjustable oil level from one-quarter to five-eighths of the sight glass, equivalent to 25%–62.5% of the sight-glass level.
The adjustable setting allows the regulator to be commissioned according to the compressor manufacturer’s oil-level requirement.
Its specified operating differential pressure is 0.35–6.2 bar. The catalogue lists no equalization connection and gives the connection designation as “7 bolts”.
PKOLC-2-5E: Adjustable Oil Level with Equalization
PKOLC-2-5E provides the same one-quarter to five-eighths adjustable oil-level range and 0.35–6.2 bar operating differential-pressure range.
The manufacturer’s model table identifies an equalization connection for this version. It also marks PKOLC-2-5E as YES under the column “Suitable with R717 & HP”, while the other two models are marked NO.
HP is not defined on the referenced catalogue page. Confirm the actual refrigerant, oil and application during selection. This entry does not establish a working-pressure rating above the stated 32 bar maximum.
All three selected models are classified as mechanical oil level regulators.
Working Pressure and Temperature
The maximum working pressure is 32 bar, equivalent to 3.2 MPa. The catalogue also expresses this rating as 464 PSI.
The allowable operating temperature is −10°C to +120°C.
Maximum working pressure and operating differential pressure are separate limits. System pressure must remain within the maximum working-pressure rating, while the operating oil-pressure differential must remain within the range specified for the selected model.
Connections and Compressor Compatibility
The factory drawings identify a 3/8 SAE oil-line connection. The catalogue describes SAE flare oil connections and flange mounting at the compressor crankcase sight-glass housing.
Check the compressor model, flange geometry, installation space and adapter requirements before ordering a replacement.
The catalogue’s “5 bolts” and “7 bolts” designations do not provide complete flange-hole dimensions or establish compatibility with every compressor. Send the existing flange dimensions or photographs when requesting replacement assistance.
Dimensions
PKOLC-2 has a body diameter of 102 mm, an overall height of 148.5 ±3 mm and a body height of 118 ±2 mm. Its sight-glass centre is shown 55 ±2 mm above the base.
The shared catalogue drawing beside PKOLC-2-5 and PKOLC-2-5E shows a body diameter of 100 mm, an overall height of 180.5 mm and a body height of 122 mm.
Use the original drawing to check connection clearances and local dimensions. The adjustable-model dimensions come from one shared catalogue drawing.
Installation and Maintenance
The manufacturer recommends an oil strainer, oil filter or oil filter drier to protect the regulator from system debris.
Avoid excessive vibration and keep the operating differential oil pressure within the selected model’s specified range.
Follow the supplied installation sheet for mounting and commissioning. The catalogue instructs installers to keep the body horizontal. Confirm the required orientation and oil level against the instructions supplied with the actual unit and the compressor manufacturer’s requirements.
Ordering Information
Please provide the required model, quantity, compressor make and model, refrigerant, oil type, working pressure, operating oil-pressure differential and delivery destination.
For replacement applications, include photographs and dimensions of the existing regulator and compressor flange so that model selection and adapter requirements can be checked.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | HPEOK |
| Series | PKOLC |
| Product Type | Mechanical Oil Level Regulator |
| Application | Low-pressure oil-management systems on parallel compressor racks |
| Mounting Location | Compatible compressor crankcase sight-glass housing |
| Maximum Working Pressure | 32 bar / 3.2 MPa / 464 PSI |
| Allowable Operating Temperature | −10°C to +120°C |
| Oil-Line Connection Shown | 3/8 SAE |
| Oil-Line Connection Type | SAE flare |
| Fixed-Level Model | PKOLC-2 |
| Adjustable-Level Models | PKOLC-2-5 and PKOLC-2-5E |
| Equalization Connection | PKOLC-2-5E, according to the model table |
| Compressor Adapters | Available; exact adapter and inclusion to be confirmed |
| Material, Weight and Oil Flow Rate | Not stated on the referenced catalogue page |
Model Comparison
| Model | Oil-Level Setting | Operating Differential Pressure | Equalization Connection | Catalogue Connection |
|---|---|---|---|---|
| PKOLC-2 | Fixed at 1/2 sight glass | 0.35–2.0 bar | No | 5 bolts |
| PKOLC-2-5 | Adjustable, 1/4–5/8 sight glass | 0.35–6.2 bar | No | 7 bolts |
| PKOLC-2-5E | Adjustable, 1/4–5/8 sight glass | 0.35–6.2 bar | Yes | 7 bolts |
Dimensions in Millimetres
| Model | Body Diameter | Overall Height | Body Height |
|---|---|---|---|
| PKOLC-2 | 102 | 148.5 ±3 | 118 ±2 |
| PKOLC-2-5 | 100 | 180.5 | 122 |
| PKOLC-2-5E | 100 | 180.5 | 122 |
PKOLC-2-5 and PKOLC-2-5E follow the shared adjustable-model drawing in the 2020 catalogue.
| Model |
PKOLC-2 - Fixed Oil Level, PKOLC-2-5 - Adjustable Oil Level, PKOLC-2-5E - Adjustable with Equalization |
|---|






