Danfoss ETS6 Stepper Motor Coils – JST XHP-5 & XHP-6
먼저 견적을 확인한 후 결제하세요. 상품 가격에는 배송비가 포함되지 않습니다. 구매 요청 제출 시 결제할 필요가 없습니다.
주문 방법:
1) 장바구니에서 “주문 요청 작성하기”를 선택하고 상품 모델/사양, 수량과 전체 배송지 주소(국가 및 우편번호 포함)를 입력해 주세요.
2) 재고, 배송비를 포함한 총액과 예상 배송 기간을 확인해 드립니다.
3) 총액에 동의하시면 Shopify 결제 링크를 이메일로 보내 드립니다.
4) 해당 링크로 결제하시면 전액 입금 후 발송을 준비합니다.
구매 요청 제출만으로 주문이 완료되지는 않습니다. 배송 기간은 예상치입니다.
Danfoss ETS6 Stepper Motor Coils – JST XHP-5 & XHP-6
Description
Danfoss ETS6 stepper motor drive coils are designed for use with compatible ETS6 electronic expansion valves. When operated by a suitable unipolar stepper driver, the coil’s sequenced excitation moves the valve’s internal permanent-magnet mechanism to regulate refrigerant flow.
The listed selection includes JST XHP-5 and JST XHP-6 connector versions, with cable lengths from 0.7 m to 3 m depending on the exact code. Select the connector, cable length and manufacturer ordering code to match the controller and installation.
These are ETS6 stepper drive coils, not ordinary on/off solenoid-valve coils. The valve and controller or driver are ordered separately.
Features
- Designed for the Danfoss ETS6 electronic expansion valve family.
- Rated supply of 12 V DC and rated current of 0.26 A per phase.
- JST XHP-5 and JST XHP-6 connector options.
- Code-specific cable lengths of 0.7 m, 1.5 m, 2 m or 3 m.
- IP66 enclosure rating and Class E insulation.
- Removable external coil design for the matched ETS6 valve.
- Exact ordering codes identify connector, cable length and factory packing format.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Danfoss |
| Official Product Name | Electric expansion valve coil |
| Compatible Valve Family | ETS6 |
| Drive Type | Unipolar permanent-magnet stepper drive |
| Excitation Method | 1–2 phase |
| Rated Supply Voltage | 12 V DC |
| Rated Current | 0.26 A per phase |
| Nominal Coil Resistance | 46 Ω |
| Resistance in Manufacturer Wiring Diagram | 46 ±3 Ω |
| Published Power Value | 3 W nameplate/database rating |
| Enclosure Rating | IP66 |
| Insulation Class | E; UL Class 105 (A) designation as published |
| Cable Lengths | 0.7 / 1.5 / 2 / 3 m, depending on code |
| Ambient Temperature | −30°C to +70°C |
| Maximum Winding Temperature | 115°C |
| Maximum Ambient Humidity | 95% RH |
| Supply Scope | Selected coil, cable and connector; valve and controller separate |
The 3 W value is the manufacturer’s published rating, not constant instantaneous power in every excitation state. The 115°C winding limit is separate from the permitted ambient temperature.
Models, Connectors and Cable Lengths
| Danfoss Code | Connector | Cable Length | Current Factory Format | Factory Pack Quantity |
|---|---|---|---|---|
| 034G5115 | JST XHP-5 | 0.7 m | Multi pack | 10 pc |
| 034G5145 | JST XHP-5 | 1.5 m | Multi pack | 10 pc |
| 034G5135 | JST XHP-5 | 3 m | Multi pack | 5 pc |
| 034G5110 | JST XHP-5 | 0.7 m | Industrial pack | 100 pc |
| 034G5140 | JST XHP-5 | 1.5 m | Industrial pack | 100 pc |
| 034G5180 | JST XHP-5 | 2 m | Industrial pack | 60 pc |
| 034G5130 | JST XHP-5 | 3 m | Industrial pack | 40 pc |
| 034G5105 | JST XHP-6 | 0.7 m | Multi pack | 10 pc |
| 034G5100 | JST XHP-6 | 0.7 m | Industrial pack | 100 pc |
| 034G5150 | JST XHP-6 | 3 m | Industrial pack | 40 pc |
Connector Selection
JST XHP-5 is a five-position connector. JST XHP-6 is a six-position connector with one unused pin. Both versions have five active conductors.
The connector choice does not indicate unipolar versus bipolar drive. The manufacturer describes the XHP-5 coil as otherwise identical except that it omits the unused pin.
The Danfoss datasheet directs Danfoss controller applications to the JST XHP-5 selection. Confirm the controller’s connector, pin assignment and ETS6 drive compatibility before ordering. Voltage alone does not establish compatibility.
Matched Assembly Drive Parameters
| Parameter | Specification |
|---|---|
| Manufacturer Operating Range | 0–480 pulses |
| Excitation Speed | 30–90 pulses/s |
| Recommended Speed | 31 pulses/s |
| Full-motion Examples | 16 s at 30 pulses/s; 6 s at 80 pulses/s |
| Holding Power | Not required when stationary |
| Maximum Pulse Instruction | Do not apply more than 520 pulses |
| Installation Orientation | Coil uppermost; matched assembly within ±15° of vertical |
Follow the manufacturer’s excitation sequence and closing/reference procedure. Select the exact ordering code, connector and cable length, and specify the required quantity and packing when requesting a quotation.
| Model & Connector & Cable Length |
034G5115 | JST XHP-5 | 0.7 m, 034G5145 | JST XHP-5 | 1.5 m, 034G5135 | JST XHP-5 | 3 m, 034G5110 | JST XHP-5 | 0.7 m, 034G5140 | JST XHP-5 | 1.5 m, 034G5180 | JST XHP-5 | 2 m, 034G5130 | JST XHP-5 | 3 m, 034G5105 | JST XHP-6 | 0.7 m, 034G5100 | JST XHP-6 | 0.7 m, 034G5150 | JST XHP-6 | 3 m |
|---|



